PVC High Gloss Edgebanding

PVC High Gloss

Glossy panels are the perfect choice for the production of modern looking furniture. To this end, we can supply you the perfect matching with the perfect high gloss effect. With the rare brightness and perfect matching with the chipboard, our customers have always expressed their satisfaction of this product as it makes their furniture stand out from those of competitors.

Cutting MachineThe standard thicknesses of PVC are 0.4mm, 1mm and 2mm. It is, however possible to produce any thickness from 0.3mm to 3mm, if demanded. In our productions, we make jumbo rolls in widths of 420mm. We can slit them to any width that you would prefer till the thickness of 1mm. For thickness above 1mm and other possible thickness or width of your preference, contact us and we will strive to have it for you.

  • test-intro

    PVC Edgebanding Comparison Presentation

    We strongly urge you to go through this comparison presentation. In this site, you will be guided through simple tests which will eventually show you the quality of TECE PVC against your current supplier.

    We simply ask you to compare two samples against each other. Please be sure to follow each step carefully to verify the validity of each step.

    To obtain samples of Tece PVC, please get in touch with us.

    After finishing this presentation, you will have a better idea of quality standards of Tece PVC edging.
  • test-1

    Test 1 | Surface

    Hold our sample with your current supplier under the light (as shown in the photo). Evaluate the following points between two products:

    1. Printing quality
    2. The sharpness of design
    3. The smoothness of colors
    4. The smoothness of the surface
    The UV printing technology enabled us to produce designs that are superior and sharper than any other printing techniques.
  • test-5

    Test 2 | Solvent Test

    Furniture producers must clean the remainder of the glue on the edge after applying the edging to the panel. During this process, the surface of the PVC will be wiped along the corner with some sort of solvent. Thanks to our UV printing and lacquering system, our PVC edging has a high resistant to solvent; this ensures that the color or design would never change no matter what sort of solvent is used.

    Please wipe our PVC sample with the solvent provided; do the same test with your current PVC.

    Now compare which one is still look the same as original.
  • test-5

    Test 3 | Consistency in all thickness and panel

    We take pride in our printing process. On the paper with samples, you can compare our edging matched with panel. All thicknesses are also attached to the paper; 0.4, 0.8 and 2mm. Since we are capable of printing all thickness in the same printing line, we are able to print the same color and same design with all.

    Please make the same comparison with your current supplier.
  • test-5

    Test 4 | Scratch Test

    The edges of panels are the most vulnerable parts of furniture. Thus, they must be durable and strong against hits and damages. PVC itself is a durable material; how about the wood design on the PVC?

    This test would prove that not only Tece PVC edge is durable but also the adhesive of design is strong. Thanks to our UV printing and lacquering technology, both our design and our PVC surface is resistant to scratches and damages.

    Take the wooden stick and hold it in 90 degree angle. Scratch the surface with it at least 5 times. Do this test with your current supplier. Check which products' surface remains the same after the scratch.
  • test-5

    Test 5 | Adhesion Test

    One other way to test the PVC edging is to test the adhesion of the print to the PVC substrate.

    This test is to demonstrate the strength of the lacquer on the surface of Tece PVC.

    Please stick the tape to the surface with as much pressure as possible. And peel the tape off rapidly. If the surface is still proper; then, it shows the strength of the surface.

    Please do the same test on the product of your current supplier and see which products' surface still remains the same.
  • test-5

    Conclusion

    At TECE, we know that our PVC quality is superior from many other producers.

    With this guided tests, we wanted to show you this step by step. Of course, there are many other tests that could be done to check the quality. Yet within the limits, we found these tests to be the most effective and measure ones. We hope that with this presentation, you are better furnished with the quality of Tece PVC edges. Please contact us to get actual Tece PVC samples to comparison.

    For more information about the PVC and its production process, please take a minute to view this visual presentation. Thank you for taking the time to view this presentation.

  • Image 01 Intro
  • Image 01 Test 1
  • Image 01 Test 2
  • Image 01 Test 3
  • Image 01 Test 4
  • Image 01 Test 5
  • Image 01 Conclusion

Tece Twitter